One-of-a-Kind

#0100 is an open band topped by a flat, asymmetric plate pierced with an irregular cutout and framed by a thick, molten-looking border. The shoulders taper down to a rounded shank that sits easily on the finger.The plate is worked in sterling silver, its raised border left rough where it was shaped, so light pools in the recess of the cutout and skims the heavier edge. No two angles of it read quite the same.It wears like a small piece of found metal — quietly off-balance, with character that settles further as the surface softens and gathers a patina over time. Material: Sterling Silver (.925) Molten-edged asymmetric plate Handcrafted in the USA One of a Kind

#0209 is a hand-formed silver ring of irregular planes meeting at slight angles — a small carved object more than a polished band. Each plane takes light on its own terms, so the ring moves between soft and crisp through the day. The asymmetry is faint but constant. Simple silhouette, complicated surface; the contrast is the point, and wear keeps adding to it. Material: Sterling Silver (.925) Faceted angular planes Handcrafted in the USA One of a Kind

#0126 looks fused rather than formed — small fragments of silver joined into one continuous band. The rhythm around the finger is uneven by design: low bumps, softened hollows, no repeating pattern. Light moves across it unpredictably. A deliberate weight in a modest silhouette; the roughness reads as geology, not damage. Material: Sterling Silver (.925) Fused-fragment band Handcrafted in the USA One of a Kind

#0203 is a simple round band with an organic, slightly wavy profile and a faint hammered texture — a plain stacking ring shaped by hand. There is no front or back to it; the form runs evenly around.The sterling silver carries a light, irregular hammering that breaks the surface into countless small facets, each catching the light a little differently as the hand moves.Understated and easy to live with, it stacks well with other bands and wears in gracefully, the hammered surface softening into a gentle patina over time. Material: Sterling Silver (.925) Hand-hammered stacking band Handcrafted in the USA One of a Kind

#0526 is a padlock-like silver frame with a rounded wire loop, its recessed center filled with a brass panel. Shaped by hand; once sold, never restocked. Wear it as a pendant top or on a keychain. Material: Sterling Silver (.925) with brass accent Size: approx. 2.5 × 1.4 cm (3.0 cm incl. bail) Thickness: approx. 7 mm Handcrafted in the USA One of a Kind

#0524 interlinks two loops at the front into an open ring, leaving a void at its center where the loops cross. Shaped entirely by hand, each loop keeps an irregular, flowing surface, catching light along its curve so the joined form reads differently from every side. The linked loops hold the shape while the open center keeps it light, and the silver settles and deepens quietly through wear. Material: Sterling Silver (.925) Interlinked open loops Handcrafted in the USA One of a Kind

#0523 crosses smooth bars into an angular open void, one passing over the other in a bypass at the front. Worked entirely by hand, the bars keep clean, rounded surfaces that catch light along each curve, so the crossing reads differently from every side as the ring turns. The bypass form gives a little, easing on and off, and the silver softens and deepens quietly through wear. Material: Sterling Silver (.925) Crossing bypass bars Handcrafted in the USA One of a Kind

#0520 is a wide signet with a raw, eroded, reef-like face left rough straight from forming. Worked entirely by hand, the eroded surface stays pitted and uneven, catching light across every ridge and hollow so the face reads like worn stone as the ring turns. The broad signet gives it weight and presence, and the rough face only deepens and settles the more the silver is worn. Material: Sterling Silver (.925) Eroded reef-like signet Handcrafted in the USA One of a Kind

#0518 is a chunky band hammered into uneven, faceted planes — plain and solid, with no opening or ornament. Worked entirely by hand, each facet catches light at its own angle, so the surface reads as a shifting field of planes as the ring turns. The weight and faceting give it a quiet presence, and the hammered planes soften and deepen as the silver wears in. Material: Sterling Silver (.925) Faceted chunky band Handcrafted in the USA One of a Kind

#0517 is a bypass wrap whose flattened, hammered ends taper and overlap like a pair of blades passing each other at the front. Worked entirely by hand, the hammered surfaces stay faceted and uneven, catching light along every flattened plane so the ring shifts character as it turns. The bypass form gives a little, easing on and off, and the tapered ends grow softer and quietly deeper as the silver wears in. Material: Sterling Silver (.925) Hammered bypass wrap Handcrafted in the USA One of a Kind

#0514 is an open wrap whose branch-like ends stop just short of meeting, leaving a small gap at the front and the fit adjustable. Shaped entirely by hand, the band keeps an organic, irregular surface that catches light differently along each tapering end as the ring turns. The open form gives a little, easing on and off the finger, and settles into your hand the more it is worn — alive enough to move, solid enough to hold. Material: Sterling Silver (.925) Open adjustable wrap Handcrafted in the USA One of a Kind