Applied filters
#0118
¥11,200
#0118 — a hammered silver fragment in a narrow pillar form, marked with deep, deliberate crater strikes.The smallest and lightest in the series, yet the texture is anything but soft — each crater driven in with intent. Sterling silver, 4.6g.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925)
Hammered pillar charm
Handcrafted in the USA
One of a Kind
#0117
¥11,200
#0117 — a hammered silver fragment in a rectangular tag form, its texture running uniform across the full face.The most even piece in the series — the strikes land in a steady, all-over field that lets the shape stay quiet and legible. Sterling silver, 6.4g.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925)
Hammered tag charm
Handcrafted in the USA
One of a Kind
#0116
¥12,300
#0116 — a hammered silver fragment in a broad, stone-like form, its texture built up in layers.The edges are rounded rather than sharp, giving it the natural, river-worn feel of something carried a long way by water. Sterling silver, 6.3g.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925)
Hammered stone charm
Handcrafted in the USA
One of a Kind
#0115
¥13,000
#0115 — a hammered silver fragment in a triangular, arrowhead-like form.It carries the deepest texture in the series, the strikes driven hard enough to read like a tool chipped from stone rather than shaped from metal. Sterling silver, 6.8g.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925)
Hammered arrowhead charm
Handcrafted in the USA
One of a Kind
#0114
¥12,300
#0114 — a hammered silver fragment in a rectangular bar form, carrying a heavy pitted texture.Clean geometry meets a raw surface: the outline stays disciplined while every face is dimpled and scarred by hand. Sterling silver, 5.9g.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925)
Hammered bar charm
Handcrafted in the USA
One of a Kind
#0113
¥11,900
#0113 — a hammered silver fragment with a curved, flowing shape and a fine reticulated surface.Where the others in the series sit sharp and angular, this one bends — the texture pulled along the curve so the light moves with it. Sterling silver, 5.4g.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925)
Hammered curved charm
Handcrafted in the USA
One of a Kind
#0112
¥12,300
#0112 — a hammered silver fragment in a diamond form, worked over with deep, rippled texture.The irregular edges are left exactly as they fell from the hammer, the ripples running across the surface like cooled metal that never quite settled. Sterling silver, 6.2g.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925)
Hammered diamond charm
Handcrafted in the USA
One of a Kind
#0111
¥12,300
#0111 — a hammered silver fragment in an angular wedge form, its reticulated texture covering both faces.Every strike of the hammer stays visible, the surface caught somewhere between raw ore and finished metal. Sterling silver, 5.6g — small, dense, and surprisingly weighty for its size.Wear it as a pendant top or on a keychain.
Material: Sterling Silver (.925), 5.6g
Hammered wedge charm
Handcrafted in the USA
One of a Kind
US Coin Bell Charm
¥10,800
A US quarter coin, shaped by hand into a small bell with a loose bead sealed inside.It rings faintly whenever it moves — a sound you stop noticing and then catch again. Approx. 21mm diameter / 16mm height (34mm with jump ring).Wear it as a pendant top or on a keychain.
Material: Repurposed US quarter
Coin bell charm
Handcrafted in the USA
US Coin Cowboy Charm
¥9,700
A US quarter coin, hand-folded into the silhouette of a cowboy hat, its copper edge left exposed.The patina is earned rather than applied, and the coin's original surface still shows through the folds. Approx. 24mm diameter / 5mm height.Wear it as a pendant top or on a keychain.
Material: Repurposed US quarter
Coin cowboy-hat charm
Handcrafted in the USA
#0535
¥55,800
#0535 is a skeletal openwork sterling silver sleeve that slips over a standard lighter, more frame than wall.It is built from thin, branching struts woven into an airy lattice, holding its shape while leaving the body mostly open.Shaped by hand; once sold, never restocked.
Material: Sterling Silver (.925)
Skeletal lattice lighter sleeve
Type: Lighter Case
Handcrafted in the USA
One of a Kind
#0534
¥52,200
#0534 is a tapered openwork sterling silver sleeve that slips over a standard lighter, narrowing toward a flared top.A brushed diagonal band crosses the upper body, with a tangle of coral-like tendrils gathering below it.Shaped by hand; once sold, never restocked.
Material: Sterling Silver (.925)
Coral-tendril lighter sleeve
Type: Lighter Case
Handcrafted in the USA
One of a Kind
#0533
¥52,200
#0533 is a short openwork sterling silver sleeve that slips over a standard lighter, framed top and bottom by solid rims.Between them a raised, vine-like scrolled band runs around the middle, the relief worked entirely by hand.Shaped by hand; once sold, never restocked.
Material: Sterling Silver (.925)
Vine-scroll lighter sleeve
Type: Lighter Case
Handcrafted in the USA
One of a Kind
#0532
¥52,200
#0532 is an openwork sterling silver sleeve that slips over a standard lighter, hollow-walled and built to be handled.The wall is pierced with irregular, reef-like openwork, each opening cut so no two stretches of the surface repeat.Shaped by hand; once sold, never restocked.
Material: Sterling Silver (.925)
Reef-pierced lighter sleeve
Type: Lighter Case
Handcrafted in the USA
One of a Kind
#0531
¥52,200
#0531 is an openwork sterling silver sleeve made to slip over a standard lighter, turning an everyday object into something handworked.The barrel is woven from crossing wires into a lattice of diagonal openings, light passing through the gaps as it catches the metal.Shaped by hand; once sold, never restocked.
Material: Sterling Silver (.925)
Woven-lattice lighter sleeve
Type: Lighter Case
Handcrafted in the USA
One of a Kind
#0308
¥52,800
#0308 is a silver lighter case built from interlocking, hand-formed segments that stack and twist into a structure with an intentionally chaotic rhythm.
The uneven contours create a sense of movement even when still, giving the piece the presence of something shaped by pressure rather than symmetry.
Its weight settles naturally into the hand, reinforcing the impression of a tool crafted for real use rather than a polished decorative object.
Light threads through its gaps and ridges in shifting patterns, revealing new details each time the case is turned.
Material: Sterling Silver (.925)
Stacked interlocking segments
Type: Lighter Case
Handcrafted in the USA
One of a Kind
#0307
¥49,200
#0307 is a silver lighter case shaped through a slow, hands-on forming process that allows the metal to settle into organic, irregular lines with quiet intention.
Its asymmetry comes from the material's own response to shaping, giving the piece a presence that feels more unearthed than manufactured.
The weight and density sit comfortably in the hand, creating the impression of a tool refined by years of use rather than a newly crafted object.
Light catches unevenly across each ridge and fold, giving the case a shifting expression that accentuates its handmade character.
Material: Sterling Silver (.925)
Organic ridged form
Type: Lighter Case
Handcrafted in the USA
One of a Kind